System Time Setting; Weekly Timer - Silvercrest SKWH 2000 A1 Bedienungs- Und Sicherheitshinweise

HEATING STEP ADJUSTMENT
By pressing the heating level button
you can adjust the desired heating level.
By each pressing the button, you will switch to
the next heating level. Depending on the selected
heating level, you will see the respective value on
the display.
Press once: 1 heating level (1000 W)
Press twice: 2 heating level (2000 W)
Press thrice: Fan

SYSTEM TIME SETTING

Prior to use the week timer first time, set the current time:
1. Select the first heating level. The left symbol lights up
on the display
A
Chapter Heating Level Setting.
2. Press the shown week timer button
3. Then the week day is shown on the display (see
the table). By pressing the plus
button, select the current day of the week:
01. Monday 02. Tuesday
03. Wednesday 04. Thursday
05. Friday 06. Saturday
07. Sunday
4. Confirm your selection by pressing the OK
button .
5
5. Now the display now shows the number of hours
(00). By pressing the plus
tons, you can adjust the desired number of hours
(00-23).
6. Confirm your selection by pressing the OK
button .
5
7. The display now shows the number of minutes
(00). By pressing the plus and
, you can adjust the desired number of minutes
7
(00-59).
8. You can save your settings by pressing the OK but-
14 GB/IE/NI/CY
,
11
. For details, refer to
:
9
or minus
8 7
and minus but-
8 7
minus buttons
8
ton and then exit the menu.
5
9. As soon as you have set the system time, "P1" appe-
ars in the display.
10. Wait 10 seconds without pressing any key. Then
the system settings will be accepted by the sys-
tem. The ambient temperature is shown on the
display. If necessary, you can continue selection
of programs: P1, P2... P6. For more information,
see Chapter 'Week Timer".
Please note: to reset the system time, you have to
turn off the device and disconnect it from the po-
wer supply.

WEEKLY TIMER

The purpose of the week timer is to auto-
matically switch the wall-mounted ceramic
fan heater on and off at specific times. To
set the week timer, you have 5 pre-set pro-
grams available. Moreover, you have also
a program to be set manually. As soon as
the function is activated, the device auto-
matically switches on or off according to the
respective time table.
Please note: it is not possible to start the week timer,
as long as the device is at the fan mode.
Please note: To adjust the week timer, you have to set
the system time first (see 'System Time Setting')
SETTING THE TIMER PROGRAMS, 1-5 (PRE-SET
PROGRAMS)
1. Turn on the device (see 'Starting').
2. Select the first or the second heating level. To do
so, press the heating level button
bol lights up on the display. See Chapter "Hea-
ting Levels Setting". Alternatively, you can select
a desired temperature (see chapter "Temperature
Setting").
Please note: The wall-mount ceramic fan heater will
be turned ON depending on the selected program and
run the last heating level or temperature you selected.
. The sym-
11 A