Herunterladen Inhalt Inhalt Diese Seite drucken

Precautions - Panasonic WV-CZ352 Handbuch

Colour cctv camera
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 32

PRECAUTIONS

1. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no user-serviceable parts inside.
Ask qualified service personnel for servicing.
2. Handle the camera with care.
Do not misuse the camera. Avoid striking, shaking, etc.
The camera could be damaged by improper handling or storage.
3. Do not expose the camera to rain or moisture, nor try to operate it in
wet areas.
This product is designed for indoor use or locations where it is protected from rain and
moisture.
Turn the power off immediately and ask qualified service personnel for servicing.
Moisture can damage the camera and also create the danger of electric shock.
4. Do not use strong or abrasive detergents when cleaning the camera
body.
Use a dry cloth to clean the camera when it is dirty.
When the dirt is hard to remove, use a mild detergent and wipe gently.
Afterwards, wipe off the remaining detergent with a dry cloth.
5. Never aim the camera at the sun.
Whether or not the camera is in use, never aim it at the sun or other extremely bright
objects. Otherwise, blooming or smear may be caused.
6. Never aim the camera at strong light sources for an extended period
of time.
A light source such as a spot light causes burn-in on the display screen. Failure to
observe this may cause the image to become discoloured due to deterioration of the
colour filter in the CCD.
7. Do not operate the camera beyond the specified temperature,
humidity or power source ratings.
Do not use the camera in an extreme environment where high temperature or high
humidity exists. Do not place the camera near heat sources such as radiators, stoves
or other units that produce heat.
Use the camera under conditions where temperature is between -10 ˚C - +50 ˚C {14 ˚F
- 122 ˚F}, preferably +40 ˚C {104 ˚F}, and humidity is below 90 %.
The input power source is 9 V DC - 15 V DC.
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis