Panasonic WV-CZ352 Handbuch Seite 25

C Light Control Setting (ALC/MANUAL)
Refer to Light Control Setting on page 16.
D Auto Focus Setting (AF MODE)
Refer to Auto Focus Setting on page 22.
E Scene File Setting (SCENE FILE)
1. To set a scene file number
Move the cursor to SCENE FILE and select a scene file number (1 to 10, or
OFF). No scene file is selected at OFF.
2. To set scene file details
Move the cursor to a scene file number and press the SET button. The setting menu
appears.
F Deleting Preset Positions
Move the cursor to DEL and press the SET button.
2 Home Position Setting (HOME POSITION)
1. To set a position number for the home position Move the cursor to HOME POSI-
TION and select a desired position number.
2. Select OFF if you are not using the home position function.
3 Self Return Setting (SELF RETURN)
This menu is used to set up the time needed to return to the home position automatically.
Move the cursor to SELF RETURN, select a return time from among the following
and press the SET button to confirm your selection.
MIN stands for minute(s).
4 Image Hold (IMAGE HOLD)
The camera picture remains as a still image on the monitor screen until the camera reach-
es the preset position. This function is useful for surveillance via local area network.
Move the cursor to IMAGE HOLD and select ON or OFF.
** SCENE FILE 1 **
SHUTTER AUTO
AGC ON(MID)
SENS UP OFF
WHITE BAL ATW1
MOTION DET OFF
RET TOP END
1MIN 2MIN 3MIN
OFF 60MIN
30MIN
5MIN 10MIN
20MIN
25