Camera Installation; Connections; Video Cable; Power Cable - Panasonic WV-CZ352 Handbuch

CAMERA INSTALLATION

Mounting from the top
●
Remove the Camera Mounting Adapter from the bottom of the camera by removing the
two fixing screws. Attach the Camera Mounting Adapter to the top as shown in the figure,
then mount the camera on the mounting bracket.
Cautions:
Be sure to use two original fixing screws for the
●
mounting adapter.
Longer screws may damage the inner compo-
●
nents. Or shorter screws may cause the camera
drop.

CONNECTIONS

Caution: The following connections should be made by qualified service personnel or
system installers in accordance with all local codes.

1 Video Cable

Type of coaxial RG-59/U
cable (3C-2V)
(m)
Recommended maxi-
mum cable length
(ft)

2 Power Cable

Connect the power cord to the DC12 V IN
terminal.
Resistance of copper wire [at 20 ˚C {68 ˚F}]
Copper wire size
(AWG) (0.22 mm
0.078
Ω/m
Resistance
Ω/ft 0.026
10
RG-6U RG-11/U
(5C-2V) (7C-2V)
250 500 600
825 1 650 1 980
#24 #22 #20
) (0.33 mm ) (0.52 mm
2 2
0.050 0.03
0.017 0.010
RG-15/U
(10C-2V)
800
2 640
2
#18
) (0.83 mm )
2 2
0.018
0.006
1
3