Bosch GCM 12 SDE Professional Originalbetriebsanleitung Seite 31

160992A3UL_201801.book Page 31 Wednesday, January 10, 2018 1:52 PM
match the mounting hardware of the saw will run eccentri-
cally, causing loss of control.
 Never remove cutting remainders, wood chips, etc.
from the sawing area while the machine is running. Al-
ways guide the tool arm back to the neutral position first
and then switch the machine off.
 Do not touch the saw blade after working before it has
cooled. The saw blade becomes very hot while working.
 Never make warning signs on the machine unrecognis-
able.
 The power tool is provided with a laser warning label
(marked with number 35 in the representation of the
power tool on the graphics page).
IEC 60825-1:2014
<0.39mW, 650 nm
CLASS 1 LASER PRODUCT
Do not direct the laser beam at persons
or animals and do not stare into the di-
rect or reflected laser beam yourself, not
even from a distance. You could blind
somebody, cause accidents or damage
your eyes.
 Do not make any modifications to the laser equipment.
The setting options described in these operating instruc-
tions can be used safely.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more safely.
Symbols and their meaning
 Laser class 1
 Keep hands away from the cutting
area while the machine is running.
Danger of injury when coming in con-
tact with the saw blade.
Bosch Power Tools
Symbols and their meaning
 Wear a dust respirator.
 Wear safety goggles.
 Wear ear protectors. Exposure to
noise can cause hearing loss.
 Danger area! Keep hands, fingers or
arms away from this area.
English | 31
The table shows the rec-
ommended speed setting
depending on the materi-
al to be worked: alumini-
um, plastic, wood.
(not available for all coun-
try-specific product ver-
sions)
When sawing vertical bev-
el angles, the adjustable
fences must be pulled
outwards or removed
completely.
1 609 92A 3UL | (10.1.18)