Receiving And Handling The Product - CTA HCAT TE 0011 Installation - Benutzungs- Und Wartungsanleitung

U I A
HCAT TE and HCAN TE condenser units can be identi-
fied by the:
Packaging label
Giving the data identifying the product.
Rating plate
Giving the technical and performance data of the unit.
If lost, ask the After Sales Service for a duplicate.
I A
HCAT TE and HCAT TE condenser units are supplied
accompanied by:
- instruction manual;
- guarantee certificate;
- CE declaration;
These are contained in a plastic bag (A) attached to the
top of the unit.
The unit should always be handled by qualified personnel
using equipment adequate for the weight of the condenser
unit. If a forklift truck is used, insert the forks under the
bed plate, spacing the forks as wide apart as possible.
If a crane is used, pass the cables through the bottom of
the bed plate, making sure they do not exert pressure on
the unit. Once the packaging has been removed, the unit
can be lifted and moved by inserting two metal tubes (max.
diameter: 1/2") into the feet provided for this purpose and
using suitable handling equipment.
Size 0011
Dimension L 1060
Dimension P 460
Dimension H 880
Gross weight 80
HCAT TE - HCAN TE

RECEIVING AND HANDLING THE PRODUCT

0021 0025 0031
1060 1060 1060
460 460 460
880 880 1130
83 85 99
De' Longhi S.p.a. - 31100 Treviso / Italia
Via L.Seitz, 47 - tel. 04224131 fax 0422413659
MODEL:
VOLTAGE:
CODE:
COOLING CAPACITY ------------------- kW
HEATING CAPACITY ------------------- kW
REFRIGERANT TYPE -------------------
REFRIGERANT CONTENT ------------------- Kg
MAXIMUM PRESSURE ------------------- bar
MAIN ELECTRICAL POWER SUPPLY ------------------- V---Hz
AUXILIARY ELECTRICAL POWER SUPPLY ------------------- V---Hz
MAX. ABSORBED POWER ------------------- kW
MAX. ABSORBED CURRENT ------------------- A
START-UP CURRENT ------------------- A
ELECTRICAL WIRING DIAGRAM ------------------- N°
OPERATING WEIGHT ------------------- Kg
YEAR OF FABRICATION -------------------
The instruction manual is an integral part of the
unit and should thus be read and kept carefully.
Do not dispose of packaging materials in the
environment or leave them within reach of children
as they may represent a hazard.
The weight of the condenser unit is biased
towards the compressor side (side of the packaging
with the bar code, see figure at the foot of the page).
During transport, the condenser unit must be
kept in the vertical position.
BAR CODE
0041 0051 0061
1060 1060 1060
460 510 510
1130 1380 1380
114 131 138
IDENTIFICATION
Tampering with or
the removal
absence of rating plates or
other means enabling the
unit to be identified causes
problems during installa-
tion and maintenance.
A
0071 0091 0101
1450 1450 1450
550 550 550
1200 1200 1700
225 228 288
English 07/03
or
0121
1450
550
1700
291
3