Before Initial Use; Initial Use; Charging The Power Bank - Silvercrest SPBT 6.000 A1 Bedienungsanleitung Und Sicherheitshinweise

Before initial use

Remove the Power Bank and the accessories from the
packaging and remove the packaging material completely.
Check the package contents for completeness. Contact Service
immediately in case of missing or defective components.

Initial use

WARNING! Never charge the Power Bank while
it is being used to charge an external device.

Charging the Power Bank

WARNING! Due to the high current consumption,
do not charge the Power Bank on a notebook/PC
(USB 2.0, USB 3.0) but only with a suitable mains
adapter (5V
package contents).
To charge the internal battery of the Power Bank, connect the
Power Bank to a suitable USB mains adapter (not included in
the package contents) using the supplied USB charging cable
(B). To do this, plug the Micro-USB connector of the USB
charging cable (B) into the Micro-USB socket (2) of the Power
Bank, and plug the USB connector into the USB socket of the
SilverCrest SPBT 6.000 A1
, min. 2.0A; not included in the
English - 29