Storing The Device When Not In Use - Silvercrest SPBT 6.000 A1 Bedienungsanleitung Und Sicherheitshinweise

into the USB socket (3) of the Power Bank. If charging does
not start automatically, briefly press the Charge level/START
button (1) to start the charging process. Alternatively, you
can also use the original charging cable of the respective
device manufacturer (USB port).
During the charging process, the display (4) gives you
information about the percentage charge level of the Power
Bank. The percentage shown on the display (4) is lit during the
charging process. If the remaining charge level of the Power
Bank is 5 per cent or lower, the percentage shown on the
display (4) flashes.
 You can stop the charging process at any time by
unplugging the USB charging cable (B). In this case the
display continues to display the current charge level of the
Power Bank for about 30 seconds before it turns off.
Alternatively you end the charging process by pressing the
Charge level/START button (1) twice. In this case, the
display (4) turns off immediately.

Storing the device when not in use

If the Power Bank is not going to be used for a long
period of time, you should recharge it on a regular
basis. This helps maintain battery performance.
Keep the device in a cool, dry place.
SilverCrest SPBT 6.000 A1
English - 31