Checking The Charge Level; Handling And Use; Charging Mobile Devices With The Power Bank - Silvercrest SPB 10.000 B2 Bedienungsanleitung

LED display
One LED is flashing
One LED is on, the second LED is
flashing
Two LEDs are on, the third LED is
flashing
Three LEDs are on, the fourth LED is
flashing
All LEDs are on

Checking the charge level

You can also check the charge level of the power bank when
it is not charged or while it is being used for charging .
♦ Press the ON/OFF button
current charge level of the power bank for about 30 seconds .
LED display
All LEDs are on
Three LEDs are on
Two LEDs are on
One LED is on
One LED is flashing
All LEDs off

Handling and use

Charging mobile devices with the power bank

CAUTION
► When 3 mobile devices are charged simultaneously via
the Lightning connector
the USB socket
connected mobile devices may not exceed 3 A .
♦ Plug the appropriate USB cable for your device into the
USB socket
micro USB plug
device you want to charge .
■ 8
│ GB│IE│NI
, the micro USB plug
, the total power consumption of the
or plug the Lightning connector
into a suitable socket on the mobile
Charge level
briefly . The LEDs
Charge level
76 - 100 %
SPB 10.000 B2
< 20%
20–49%
50–74%
75– 97%
98–100%
show the
51 - 75 %
26 - 50 %
3 - 25 %
< 3 %
0%
and
or the