General Safety Instructions - WIKA 981 serie Betriebsanleitung

3. Safety

3.4 General safety instructions

Before installation, commissioning and operation, ensure that the following has been
selected for the diaphragm seal measuring system in terms of the specific measuring
conditions:
Version
■
Measuring range
■
System fill fluid
■
Wetted material
■
In order to guarantee the measurement accuracy and long-term stability specified, the
corresponding load limits must be observed.
Specifications of the components: See data sheet at www.wika.com
Non-observance can result in serious injury and/or damage to the equipment.
With non-observance and non-compliance to the operating instructions, approvals (e.g.
ATEX) can become invalid.
Improper selection of the system fill fluid (e.g. painting or oxygen applications) can lead to
serious personal injury and/or damage to property and invalidate the operating licence of the
plant.
The instruments should be protected against coarse dirt and wide fluctuations in ambient
temperature.
Further important safety instructions can be found in the individual chapters of
these operating instructions.
WIKA operating instructions, diaphragm seal measuring systems
EN
7