eta FIDO Bedienungsanleitung Seite 52

ENG
4) The dustbin can be washed. (Note: the dust box should be completely air-dried before
re-inserting.
Rinse the protection filter under running water. Allow them to dry out properly before
their re-use. Shake out the HEPA filter gently, or blow it out. If the HEPA filter is very
dirty, you can rinse it under running lukewarm water. Allow it to dry out properly.
– If you clean the HEPA filter with water, its filtration properties will deteriorate.
The filter cannot be washed more than three times. After that, a new filter needs
to be purchased.
– We recommend that you replace the HEPA filter twice a year. The other filters are
to be replaced if they cannot be properly cleaned any more, or if they are damaged.
5) After cleaning, re-assemble the filter in the dustbin first, and then install the dustbin into
the cleaner.
5.4 CLEAN THE MAIN BRUSH
Disassemble the Main Brush
1) Push the locking-bar buckle and lift it upward.
2) Clutch the main brush and lift it upward.
Attention
ENG - 52
cold air
hot air