Indication Of Residual Heat; Power Function And Super Power Function; Management Of Maximum Power; Timer Function - Novy 40 00x Up Bedienungsanleitung

on the display. The symbol will disappear when the pan is
placed back onto the cooking surface. The cooking will then
continue at the same power level as selected previously.
Switch off the cooking zone after use. The pan detection
no longer be active.

5.1.4 Indication of residual heat

After the cooking zone or hob has been switched off completely,
the hob glass will still be warm, which can be seen by
H symbol disappears when the cooking zone glass can be
handled without danger.

WARNING: As long as the residual heat indication
remains active, the cooking zone(s) must not be
touched and no heat-sensitive items should be
placed on the cooking zone. Risk of fire and burns.

5.1.5 Power function and Super Power function

The Power function increases the power rating of the selected
P
cooking zone. If this function is activated, these cooking zones
will be subjected to considerably higher power for 10 minutes.
The Power function is designed to quickly heat large quantities
of water, for pasta for example.
Switching Power on and off:
Switch on power
Press the cooking zone selection button.
Press the [—] button and then the [+] button
until P
Switch off Power
Press on the [—] button

Management of maximum power:

If this power limit is exceeded when switching to a high
selected cooking heat or switching the power function on, the
power management module reduces the cooking position of
the relevant cooking zone. This cooking zone will first flash,
and it is then automatically reduced to the maximum possible
cooking heat
The maximum individual power for each zone is 3700 W.
Cooking zone in cm
Front 24 x 20
Back 24 x 20
Power limit
Selected cooking zone with Power function
Power limit activated
[9] reduced to [8] and flashes
will
H . The
Display
P
9‐0
Power (W)
Normal: 1600
Power: 1850
Normal: 2100
Power: 3000
Display
P
8

5.1.6 Timer function

The timer function allows all cooking zones to be used
simultaneously for different periods of time (0 to 99 minutes).
Setting or changing the cooking time
Press the cooking zone selection button
Press [—] and [+] at the same time.
Select the timer
Press [—] and [+] at the same time.
Reduce the time
Press [—] on the timer
Increase the time
Press [+] on the timer
A dot next to the indication of the power setting of the selected
zone lights up to activate the timer. The time is selected and the
countdown begins.
Switch off the timer function
Select the timer
Press the cooking zone selection button
Press [—] and [+] at the same time.
Stop the timer
Keep pressing [—] on the timer until the timer
displays ,
00
or set the power of the cooking zone to
The timer can also be used as an independent cooking alarm
without selecting a cooking zone. If the hob is to be switched
off, the independent cooking timer will continue until the end of
the set time.
Using the timer without cooking:
Timer without cooking
Switch on the hob. Press 2 sec. on
Select the timer
Press [—] and [+] simultaneously on the timer
Reduce the time
Press [—] on the timer
Increase the time
Press [+] on the timer
After a few seconds the LED no longer flashes [min]. The time
has been selected and the countdown has begun.
– 57 –
Timer function
.
.
Dot is on
0
Display
1‐P
00
30‐
29...
01‐
02...
Display
00
Display
00
30‐
29...
01‐
02...