Description Of The Device; Technical Specifications Of The Induction Hob; Principle Of Induction; Noise Caused By Induction - Novy 40 00x Up Bedienungsanleitung

3 DESCRIPTION OF THE DEVICE

The device is an induction cooking plate with integrated
worktop extraction. The induction hob has 4 cooking zones
with an integrated ventilation tower located at the back of the
hob for the removal of cooking fumes. The hob and cooker
hood can be operated separately. You will find an explanation
of the operation of the device further in this manual.
3.1 Technical specifications of the induction
hob
Type
Total power
Energy consumption of the
EChob cooking plate**
Cooking zone in front left
Minimum detection
Nominal power*
Extra Power*
Super Power*
Standardised category of
cookware**
Energy consumption ECcw**
cooking zone at the back left
Minimum detection
Nominal power*
Extra Power*
Super Power*
Standardised category of
cookware**
Energy consumption ECcw**
Type
Cooking zone at the back right
Minimum detection
Nominal power*
Extra Power*
Super Power*
Standardised category of
cookware**
Energy consumption ECcw**
cooking zone in front right
Minimum detection
Nominal power*
Extra Power*
Super Power*
Standardised category of
cookware**
Energy consumption ECcw**
* the power transfer may vary, dependent on the sizes and the materials of
the cooking pans
** calculated following the methods for measuring the performance (EN
60350-2)
Power Comfort
7400 W 7400 W
178 Wh/kg
240x200 mm Ø 175 mm
Ø 90 mm Ø 90 mm
1600 W 1400 W
1850 W
C
177.6 Wh/kg 210 Wh/kg
240x200 mm Ø 210 mm
Ø 100 mm Ø 100 mm
2100 W 2300 W
3200 W 3000 W
C
Teppanyaki Wok
Ø 145 mm Ø 314 mm
– –
1400 W 2000 W
2500 W
3200 W
Ø 145 mm
–
1400 W

3.2 Principle of induction

There is an induction coil under each cooking zone. When this
is on, it produces a variable electromagnetic field that produces
an induction current in the bottom of the cooking pan. This
results in the warming up of the cooking pan on the cooking
zone.
Of course, suitable cooking pans are required for this:
– Recommended cooking pans include those with a magnetic
base (you can check this using a magnet): a cast iron kettle,
black iron pan, enamelled metal cooking pans, stainless steel
pans with magnetic base, etc.
– Unsuitable cooking pans include copper, stainless steel,
aluminium, glass, wood, ceramics, pottery, stainless steel
without magnetic base, etc.
The induction cooking zone immediately takes the size of the
cooking pan into account. If the diameter is too small, the
cooking pan will not work. The diameter varies in function of
the diameter of the cooking zone. Should the cooking pan not
be adjusted to the hob, the

3.3 Noise caused by induction

When using an induction hob, all kinds of noises may occur.
These noises are dependent on the construction and the
materials of the bottom of the cooking utensils.
Humming
This occurs when cooking at a higher power and this is caused
by the amount of energy that is transferred from the hob to the
cooking utensils. The noise disappears or becomes weaker
when you set the hob to a lower setting.
Sputtering
This noise occurs when the utensils consist of layers of different
materials. The noise is caused by vibrations in the areas where
the different material layers touch each other.
Whistling
Such noises generally arise when cooking with utensils
consisting of layers of different materials and when two adjacent
cooking zones are used simultaneously at maximum power.
The whistling noise disappears or becomes weaker when you
set the hob to a lower setting.
Clicking
At lower power settings clicking noises may occur at electronic
switches.
Buzzing
A buzzing sound may occur when the fan is switched on. This
fan cools the electronics at intensive use of the hob. When the
temperature is too high, the fan will keep running after the hob
has been switched off.
– 53 –
symbol will continue to flash.