Transport And Storage - RK Rose+Krieger RK Easywork Betriebsanleitung

4

Transport and storage

Transport inspection
Transport
29.05.2019
NOTICE!
The assembly workstation must not be commissi-
oned if the lifting column is damaged.
Immediately check the delivery upon receipt to ensure that it is
complete and free from transport damage. Report the extent of the
damage to the person responsible and to RK Rose+Krieger GmbH
immediately.
WARNING!
Risk of injury due to improper transport!
Loads can swing out, topple over and fall during lifting
operations. This can cause severe injuries.
– Never step under or into the pivoting range of sus-
pended loads.
– Only use approved lifting gear and load suspen-
sion devices with a sufficient load-bearing capacity.
– Do not place load-bearing equipment, such as
lifting straps and belts, over sharp edges and cor-
ners. Do not knot or twist them.
– Lift the assembly workstation carefully and observe
whether it topples. If necessary, adjust the fas-
tening.
– Be aware of the assembly workstation's centre of
gravity.
– Wear an industrial hard hat.
Assembly workstation RK Easywork

Transport and storage

87