RK Rose+Krieger RK Easywork Betriebsanleitung Seite 61

How to use these instructions
Figures
Other applicable documents
Copyright
29.05.2019
These instructions enable you to use the assembly workstation
safely and efficiently. The instructions are part of the assembly
workstation and must therefore be stored in the direct vicinity of the
assembly workstation and be accessible to staff at all times.
Staff must have carefully read and understood these instructions
before commencing any work. Adherence to all safety information
and instructions in these instructions is a basic prerequisite for safe
working.
Moreover, the local accident prevention regulations and general
safety regulations apply for the area of application of the assembly
workstation.
Figures in this manual serve to facilitate basic under-
standing and may deviate from the actual version.
In addition to these instructions, you have received the following
documents:
n Technical instructions for Easywork
n Installation instructions for Multilift I/II lifting column
n Installation instructions for controller
The instructions and information contained in the
above documents must be observed at all times.
The contents of these instructions are protected by copyright. Their
use is permitted within the scope of use of the assembly worksta-
tion.
Any other use going beyond this is not permitted without written
approval from RK Rose+Krieger GmbH.
Assembly workstation RK Easywork
Supplemental directives
61