Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembling / Functional descripion
3
Assembling / Functional descripion
3.1
Assembling
6
5
3
Fig. 1: Assembling
1
O-Rings for Connecting adapter
2
Connecting adapter
3
Housing bolts
4
Electronic output
3.2
Functional descripion
The OGM
PLUS
liquids (max. 1000 mPas, measuring method: Brookfield).
As this is a volumetric meter, pulsating or discontinuous flows can also be recorded.
This meter is therefore also extremely suitable for measurement of the volumetric flow of
diaphragm pumps driven by means of electric motors.
PLUS
The OGM
volumetric flows are stored without transmission of pulses. Preceding reverse volumetric
flows are subtracted from the next forward volumetric flow.
A further benefit of the OGM
achievement of maximum possible accuracy, taking account of conditions of use.
The advantages of this are:
n
Direct connection to an EMP E60 (via dongle box or dongle-card).
n
Operation with high-resolution pulse rate of 120 pulses per gear-wheel revolution.
n
The rate of rotation of the oval gear wheels is proportional to flow.
In cases of connection to a higher-level quantification or measuring system
(PLC or similar):
n
Adjustable pulse rate, either in pulses per revolution or pulses per liter / pulses per ml.
For factory setting (number of pulses when connecting to master controller)*)
n
The pulse output can be optionally switched between PNP or NPN.
(factory settings of this output: PNP) *)
only with auxiliary software OGM Commander Article No. 280094
n
(EBS-No. 10200916) and Windows-Software
417102601 Rev. 1-12.2019
1
2
1
8
7
4
1
2
1
is used for volumetric measurement of the rate of flow of pure and cleaned
features an automatic direction of flow detection system. Reverse
PLUS
can be found in its calibration capability. This permits
5
Housing cover
6
Sealing ring between Cover and Housing
7
Oval Gear Wheels
8
Oval Gear Housing
8
Werbung
Inhaltsverzeichnis
