Additional Safety Instructions For Pneumatic Machinery - Parkside PDSS 400 A1 Originalbetriebsanleitung

coming white, stop working
with the machine and consult
a physician.
Operate and maintain the ma-
„ „
chine for screw connections as
recommended in this manual
to prevent an unnecessary in-
crease in vibration.
Do not use work or poorly fit-
„ „
ting sockets or extensions, as
these are very likely to signifi-
cantly increase vibration.
Select, maintain and replace
„ „
consumables and machine
tools as recommended in these
instructions to prevent an un-
necessary increase in vibra-
tion.
When possible use socket fit-
„ „
tings.
Whenever possible, use a
„ „
stand, clamp or an equaliser
to support the weight of the
machine.
Do not grip the machine too
„ „
tightly but firmly, maintaining
the necessary hand reaction
forces, as the vibration hazard
typically increases when tight-
ening the grip.
z Additional safety instruc-
tions for pneumatic ma-
chinery
Compressed air can result in
„ „
serious injuries.
Safety instructions for air tools
- Always close the air supply,
release pressure from the hose,
and disconnect the machine
from the compressed air sup-
ply when the machine is not
in use, before switching ac-
cessories or when performing
repairs.
- Never aim the air flow at
yourself or others.
Hoses flapping about can re-
„ „
sult in serious injuries. There-
fore always inspect hoses and
their fasteners for damage and
a secure fit.
Direct cold air away from
„ „
hands.
Do not use quick-release cou-
„ „
plings on the tool intake of
impact- and impulse drivers.
Only use connectors made
from hardened steel (or mate-
rial with comparable impact
resistance) on threaded hose
connections.
If using universal swivel cou-
„ „
plings (coupling discs) always
use locking pins and use whip-
check hose safety cables for
protection in the event the con-
nection between the hose and
the machine or in between
hoses fail.
Be sure not to exceed the max-
„ „
imum pressure specified on the
machine.
GB 15