Herunterladen Inhalt Inhalt Diese Seite drucken

Additional Safety Instructions For Pneumatic Machines; Additional Safety Information; Before Use - Parkside PDSS 310 B5 Originalbetriebsanleitung

Druckluft-schlagschrauber
Vorschau ausblenden Andere Handbücher für PDSS 310 B5:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 85
Additional safety instructions for
pneumatic machines
Compressed air can cause serious injuries:
When the machine is not in use, the air
supply must always be shut off and the air
hose depressurised . The machine must be
disconnected from the compressed air supply
before replacing accessories or when carry-
ing out repair work .
Never aim the airflow at yourself or anyone
else .
Thrashing hoses can cause serious injury .
You should therefore always check whether the
hoses and their fixings are undamaged and
have not come loose .
Cold air must be directed away from the hands .
Do not use quick-lock couplings on the tool inlet
for impact and impulse drills . For hose connec-
tions with a thread, always only use those made
of tempered steel (or a material with compara-
ble impact resistance) .
If universal rotary joints (claw couplings) are
used, locking pins must be inserted and Whip-
check hose restraints must be used to provide
protection in the event of failure of the con-
nection between the hose and the machine or
between one hose and another .
Ensure that the maximum permissible pressure
specified on the machine is not exceeded .
For torque-controlled machines with continuous
rotation, the air pressure has safety-related
effects on performance . Requirements for the
length and diameter of the hose must therefore
be defined .
Never carry pneumatic machines by the hose .

Additional safety information

If applicable, observe special work safety or
accident prevention regulations for the handling
of compressors and compressed air tools .
Ensure that the maximum permissible working
pressure specified in the technical data is not
exceeded .
PDSS 310 B5
Do not overload this tool – use this tool only
within the capacity range specified in the
Technical Data .
Use safe lubricants . Ensure that the work area is
sufficiently ventilated . In the event of increased
discharge: Check the compressed air tool and
have it repaired if necessary .
Do not use this tool if you are distracted .
Be alert, watch what you are doing and use
common sense when operating a compressed
air tool . Do not use tools if you feel tired or are
under the influence of drugs, alcohol, or medi-
cation . A moment of inattention when operating
the tool can result in serious personal injuries .
Keep work area clean and well lit .
Cluttered or dark areas invite accidents .
Keep compressed air tools out of the reach
of children .
Do not store the tool outdoors or in damp en-
vironments without protection .
Protect the compressed air tool from dust and
dirt, particularly the compressed air connection
and the operating elements .

Before use

NOTE
The compressed air tool may only be operat-
ed using cleaned, oil-atomised compressed
air, and the maximum operating pressure of
6 .3 bar must not be exceeded on the tool .
The compressor must be fitted with a pressure
reducer to regulate the working pressure .
Wrap Teflon tape around all threaded
connections (not supplied) .
GB │ CY
 9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis