Inspection, Maintenance; Care; Technical Information - SQlab Innerbarends 410 Bedienungsanleitung

Inspection, maintenance

Check the clamping and surface of the Innerbarends regularly, twice a year, after 2000 km and especially after falls or other situations with an
unusually high force application for possible damage.
Warning
Damage may be difficult to detect. Crackling and creaking noises, discoloration, cracks and waves in the clamping and surface of
the Innerbarends® may indicate damage.
• In case of doubt, do not proceed under any circumstances and contact your SQlab dealer immediately.

Care

Clean the Innerbarends® regularly with water and a soft cloth. In the case of more severe soiling, commercially available detergents or
cleaning agents should be used together with lukewarm water.
Warning
Never use a high­pressure cleaner, cleaning rags or sponges with particularly rough or granular surfaces for cleaning.
Do not use aggressive cleaning agents such as acetone, trichlorethylene or similar, this could attack the paint and the material.

Technical information

Name
SQlab Innerbarends 410/402
®
SQlab Innerbarends 411
®
SQlab Innerbarends 411 ltd. RUH
®
SQlab Innerbarends 411 R Carbon
®
Handlebar
Weight
Art No.: diameter in the
per pair (g)
clamping area
2311 Ø 22,2mm 118
1996 Ø 22,2mm 108
2284 Ø 22,2mm 108
2310 Ø 22,2mm 40
Field of
max. tigh­ applicati­
tening on to
torque ASTM
F2043­13
5 Nm 2
3 Nm 4
3 Nm 4
5 Nm 4