Operation - Klarstein AeroVital Fry Bedienungsanleitung

EN
26
2. Close the door.
3. Press the "rotate" button to turn
on the rotation.
4. To remove the inserts after
cooking, take the drum basket
hook (10) and hook it into the
insert from below. Press the
release button and slowly pull out
the insert.

OPERATION

1. Place the unit on a horizontal, heat-resistant
and even surface.
2. Place the drip tray on the floor inside the
unit.
3. Prepare the desired insert (kebab
accessory, drum basket, roast / poultry
rotisserie, frying container or dehydrator
tray) with the food you have selected and
then place it in the hot air fryer and close
the door.
4. Connect the power cord to a properly fitted
power outlet.
5. Press the ON / OFF button
6. Next select the desired program. You can choose between the following programs:
french fries, pizza, whole chicken, steak, fish, drying and dehydrating,chicken and
cake. When you press the corresponding program icon, the time and temperature
will be shown in the display.
7. To manually set or change the temperature or time, you can adjust the preset
temperature and time using the "+" and "-" buttons in the temperature and time
settings.
8. Press the ON / OFF button
the device to start automatically.
9. When the set cooking time has expired, a beep will sound. Open the door and
remove the appropriate insert (kebab accessory, drum basket, roast / poultry
rotisserie, frying container or dehydrator tray) and place on a heat-resistant
surface. Be careful as the inside of the hot air fryer and the accessories used in it
may still be hot.
10. If you need any additional cooking time, set the time and temperature individually
and start the process again.
1 1. To reheat the food, press the reheat button
minutes and 140 °C.
on the control panel to turn on the device.
to start cooking directly, or wait a few seconds for
. The timer automatically adjusts to 6