Commissioning; Danger - JAC NEW SELF Übersetzung Der Originalanleitung

This pictogram indicates a cut hazard. You will find it at the front of the machine
around the loaf positioning area (fig.10, n°20).
You will find the circuit diagram for the machine on the back of the electrical
enclosure door (fig.10, n°22).
This pictogram indicates an electrocution hazard. Please isolate the machine
before carrying out any work on it. You will find it at the back of the machine close
to the power cable and inside the machine on the electrical enclosure (fig.10,
n°21).
5.4

Commissioning:

Before commissioning, ensure that there are no extraneous objects interfering with the machine's
moving parts.
For machine operation, please refer to the "Operation" chapter.
5.5

Danger:

If the user or the machine is in danger, you must use the main isolator switch to cut the power supply
to the machine.
Remove the plug from the power socket before any maintenance and/or servicing work.
Do not touch the blade, even if it is stationary.
To replace the blade, have the work done by your approved dealer.
Always wear cut-resistant gloves when replacing blades or when working in the vicinity of the blade.
Any maintenance work or replacement of parts must be carried out by a qualified individual.
English
10