Leuze BPS 8 S M 100-xx Anleitung Seite 22

EN
LED indicators
B1
2
Status LED
B2
2
Decode LED
4
Working range/reading distance
H Reading distance from the BPS 8 to the bar code
J Reading field width
5
NOTE
Service operating mode:
 Move SRV bar code (see
supply voltage. When in Service mode, the status LED flashes orange.
It is possible to access the BPS 8 via software with the
BPS Configuration Tool.
22
Off
Green, flashing
Green, continuous light
Red, flashing 200ms
Red, continuous light
Orange, flashing 200ms
Off
Green, continuous light
Red, continuous light
Orange, continuous light
) within the scanning beam when applying the
5
No supply voltage
Initialization phase of the device
Operational readiness
Warning
Error, no function possible
Service operation active
Positioning deactivated
Position values valid
Position values invalid
Marker label detected