Leuze BPS 8 S M 100-xx Anleitung Seite 17

Safety
This sensor was developed, manufactured and tested in line with the applicable
safety standards. It corresponds to the state of the art.
Intended use
Bar code positioning systems of the BPS 8 series are optical measuring systems
which use visible red laser light to determine the position of the BPS relative to a
permanently mounted bar code tape.
Areas of application
The bar code positioning systems from the BPS 8 series are designed for the fol-
lowing areas of application:
- Crane bridges and trolleys
- High-bay storage devices
- Side-tracking skates
- Telpher lines
- Elevators
CAUTION
Observe intended use!
The protection of personnel and the device cannot be guaranteed if the device is
operated in a manner not complying with its intended use.
 Only operate the device in accordance with its intended use.
 Leuze electronic GmbH + Co. KG is not liable for damages caused by
improper use.
 Download the operating instructions for the device at www.leuze.com.
 Read this supplement and the operating instructions for the device before
commissioning the device. Knowledge of these documents is required in
order to use the equipment for its intended purpose.
NOTE
Download operating instructions from the Internet!
 Call up the Leuze home page: www.leuze.com.
 Enter the type designation or part number of the device as the search term.
 The operating instructions can be found on the product page for the device
under the Downloads tab.
NOTE
Comply with conditions and regulations!
 Observe the locally applicable legal regulations and the rules of the
employer's liability insurance association.
Foreseeable misuse
Any use other than that defined under "Intended use" or which goes beyond that
use is considered improper use.
EN
17