Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Maintenance - Grundig GDK 6470 X Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Cleaning and Maintenance

CAUTION
Risk of damage due to the corro-
sion damage. Always operate the
appliance while cooking in order
to prevent condensate forma-
tion. Condensate may cause cor-
rosion damage. Replace immedi-
ately the faulty lamps in order to
prevent other lamps from being
overloaded. The risk of damage
occurs due to the humidity in-
trusion to the electronics. Never
A
clean the controllers with a wet
cloth. Surface may be damaged
due to improper cleaning. Clean
the stainless steel surfaces only
in the direction of brushing. Do
not use stainless steel cleaner
for controllers. The surface may
be damaged due to abrasive or
rubbing cleaning agents. Never
use abrasive or rubbing cleaning
agents. There is the risk of dam-
age due to backflow of conden-
sate. Install the air outlet duct
with a slope of 1°, slightly down-
wards the appliance.
CAUTION
A
You can use this appliance in
waste air mode and in air circula-
tion mode.
Waste air mode
Absorbed air is cleaned by oil fil-
ters and expelled by means of a
piping system. (Pic. 3) If you want
to transfer the waste air to a disa-
A
bled smoke or waste gas flue, you
have to obtain permission from an
authorised flue cleaning special-
ist. If the waste air is expelled over
the outer wall, a telescopic wall
frame should be used. Circulating
air mode
Absorbed air is cleaned by oil fil-
C
ters and an active carbon filter
and retransferred to the kitchen.
Pic. 4
To seal the materials causing
odour in the circulating air mode,
you should install an active car-
bon filter. Consult your author-
ised dealer to learn different
C
opportunities for operating the
appliance in the circulating air
mode. You can buy accessories
necessary for this procedure
from relevant points of sale, au-
thorised service agents or online
sales centre.
The appliance you have purchased is suitable
for use with carbon filter. To attach the carbon
filter;
1- Place the carbon filter into its housing. Pic. 5
2- Turn the carbon filter clockwise to make sure
that it is tightly inserted. Pic. 5
Picture 13
Picture 14
C
If the carbon filter is not properly
attached, it can fall and damage
your product.
CAUTION
A
Never wash the carbon filters.
Keep the carbon filters away
from children.
CAUTION
A
Cleaning and user maintenance
should not be performed by chil-
dren without supervision.
DE
EN
FR
PL
RO
BG
EL
Picture 15
31

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis