List Of Pictograms Used; Introduction; Intended Use; Parts Description - Miomare 307238 Montage-, Bedienungs- Und Sicherheitshinweise

List of pictograms used

Basin Mixer Tap

Introduction

Congratulations on the purchase of your
new product. You have chosen a high-
quality product. The assembly and oper-
ating instructions are part of this product. Please read
these assembly and operating instructions carefully
before use and observe all the information. These
instructions contain important information about in-
stallation, settings and care. Therefore we ask that
you retain these assembly and operating instructions
and pass them on to any future owner.

Intended use

The tap is exclusively designed for the regulation of
hot and cold water flow and for installation on wash-
basins. This tap is suitable for use with all pressure-tight
hot water systems such as central heating, instanta-
neous water heaters, pressurised boilers, etc. It is not
suitable for low pressure water heaters such as wood
or coal water heaters, oil or gas water heaters or
open electrical storage heaters. If in doubt, consult
a plumber or heating specialist. Any use for purposes
other than those specified above or any modification
to the tap is not permitted and may cause damage
to the tap. Furthermore, improper use may result in
life-threatening risks and injuries. The tap is only for
private use and is not intended for medical or com-
mercial use. The manufacturer is not liable for dam-
ages due to improper use.
14 GB/IE
Read the assembly and
operating instructions!
Observe the warnings and
safety instructions!
There is a danger of
severe or fatal injuries!
Danger to life and risk of accidents
for infants and children
Warning - risk of electric shock!
Danger to life!

Parts description

Tap lever*
1
Hot / cold plaque*
2
Allen grub screw*
3
Tap spout*
4
Aerator seal*
5
Aerator*
6
Aerator housing*
7
Tap body*
8
Base ring
9
Base ring seal
10
Drain plug*
11
Adjusting screw*
12
Lock nut*
13
Upper part of the drain set*
14
Upper drain seal*
15
Lower drain seal*
16
Lower part of the drain set*
17
Threaded flange
18
Wide sealing ring*
19
Allen key
20
Sphere*
21
Narrow sealing ring*
22
Eccentric nut*
23
Clamping plate*
24
Eccentric rod*
25
Eccentric connection*
26
2 x Connecting hose (flexible)
27
Lower part of the pull rod
28
Upper part of the pull rod
29
Tap thread*
30
Sealing ring
31
Washer
32
Fastening nut
33
Cartridge base*
34