List Of Pictograms Used; Introduction; Intended Use; Parts Description - Miomare NI182DISE-LIDL4 Montageanleitung

Introduction

List of pictograms used

Kitchen mixer tap
•
Introduction
Congratulations on your new kitchen
mixer tap! By purchasing this item, you
have chosen a high-quality product.
In the interests of readability, the kitchen mixer tap
will be referred to below as "the tap".
Please familiarise yourself with the tap before
using it for the first time. You should therefore read
the information below carefully and follow the
instructions for installation and use. Pay particular
attention to the safety instructions and follow these
to avoid risks. Use the tap only as described and
only for the specified applications.
Keep these instructions safe. Hand over all docu-
mentation along with the tap if you pass it on to
another person.
•

Intended use

The tap is designed solely for regulating the flow of
hot and cold water, and is intended for installation
in kitchen sink units. This tap is suitable for all pres-
surised hot water systems such as central heating,
continuous flow heaters, combination boilers, etc. It
is not suitable for low-pressure water heaters such
as wood or coal-fired boilers, oil or gas-fired boil-
ers or open-vented electric storage water heaters. If
in doubt, please contact a plumber or specialist.
Uses other than those described above or modifi-
cations to the tap are not permitted and may result
in damage to the tap. In addition, improper use
may lead to the risk of injury or death. The tap is
intended for domestic use only, and not for medical
or commercial applications. The manufacturer does
6 GB
Read the installation and
operating instructions!
Pay attention to the
warnings and safety
instructions!
Risk of accident or death
for infants and children!
not accept any liability for damage caused by
improper use.
•

Parts description

Tap outlet spout*
1
Tap body*
2
Cartridge*
3
Cartridge retainer*
4
Cartridge cover*
5
Hot/cold indicator*
6
Hex socket grub screw*
7
Tap lever*
8
Base ring (with built-in seal)
9
Plastic triangle
10
Tap thread
11
Hex key
12
Sealing ring
13
Washer
14
Fixing nut
15
2× connection hose (flexible)
16
Aerator*
17
*pre-assembled
•

Technical data

Connectors:
Minimum flow pressure:
Risk of serious injury or
death!
Beware of electric shock!
Green Dot recycling
logo – Duales System
Deutschland GmbH.
G ⅜"
1.5 bar