Silvercrest SFR 37 B1 Bedienungsanleitung Seite 46

WARNING! Risk of material damage!
Do not use any astringent or abrasive cleaning agents.
Do not place excessive pressure on the shaving foils 1. They
are thin and can be damaged easily.
Use the cleaning brush 18 for cleaning the cutter block 16
only. Under no circumstances should the shaving foils 1 be
cleaned with it.
NOTE: to ensure a consistently smooth shave, the device must be
cleaned and maintained regularly.
Cleaning after every dry shave
1. Press both release buttons 4 and take off the shaving foil
frame 2.
2. Tap the shaving foil frame 2 carefully.
3. Clean the cutter blocks 16 with the cleaning brush 18.
4. Place the shaving foil frame 2 on the device in such a way
that it locks into place.
Cleaning after every wet shave / occasionally af-
ter dry shave
1. If necessary, wipe the device (not the shaving foils 1) with a
slightly moistened cloth.
2. Press the release button 13. The shaving head 3 opens up.
3. Hold the device facing down and rinse the cutter blocks 16
and the shaving foil frame 2 in the shaving head 3 under
running water.
4. Allow the parts to dry completely.
• Depending on the intensity of usage, but at least every
6 months, carefully spread a small amount of sewing ma-
chine oil on the shaving foils 1, the cutter blocks 16 and the
long hair trimmer 15.
44
GB