Operation; Before Switching On For The First Time - Silvercrest SFR 37 B1 Bedienungsanleitung

• When the battery is almost flat, the plug symbol 9 flashes in
red. The device can then only be used for a short time with-
out being connected to the electricity supply.
• It takes about 5 minutes to charge the device sufficiently for
one shave.
• When the battery is fully charged, the device can be used
for approximately 90 minutes without being connected to the
power supply.
1. Switch off the device with the on/off switch 6 if necessary.
2. Connect the plug-in power unit 17 to the socket 11 on the
device.
3. Insert the plug-in power unit 17 into an easily accessible wall
socket, the voltage of which corresponds to the rating plate.
4. The charging indicator 8 flashes and the battery is charged.
When the battery is fully charged, 100% is shown and the
charging indicator 8 is lit.

6. Operation

6.1 Before switching on for the first time

CAUTION:
After unpacking, there could still be oil residues on the shav-
ing foils. Remove these with an absorbent, lint-free cloth be-
fore using the device for the first time.
39
GB