Setting The Auto-Standby Mode - Yamaha MCR-E410 Bedienungsanleitung

SETTING THE AUTO-STANDBY MODE

You can turn on/off the auto-standby feature which automatically set the system to the standby mode if you do not
operate the system for 30 minutes while the receiver is set to the CD input mode. (The default setting is "AUTO
STANDBY ON".)
Notes
• Unless you connect the receiver and the CD player with the supplied system control cable properly (see page 12), this feature does not
function for the system.
• This feature does not function for the system during playback.
NATURAL SOUND STEREO RECEIVER RX-E410
DISPLAY MEMORY
TIMER
TIME ADJ
BASS TREBLE
STANDBY/ON
PHONES
MEMORY
1
Rotate INPUT on the front panel of the
receiver to select "CD" as an input source.
2
Press MEMORY.
The current setting appears in the receiver's front
panel display for about five seconds.
3
While the current setting is displayed in the
front panel display, press u or d to switch
between "AUTO STANDBY ON" or "AUTO
STANDBY OFF".
4
Press MEMORY or wait for five seconds
without any operation to confirm the setting.
34
En
Setting the auto-standby mode
u / d
PURE DIRECT
AUTO/MAN'L PRESET/BAND PRESET/TUNING
VOLUME
TIMER HOUR MIN
INPUT
BALANCE
L R
MIN MAX
INPUT