What To Do If - IKEA LAGAN Bedienungsanleitung

ENGLISH
1
Open the door fully.
3
Close the oven door
to the first opening
position (halfway).
Then pull forward
and remove the
door from its seat.
5
Release the locking
system to remove
the internal glass
panel.

What to do if...

Warning! Refer to the Safety chapters.
2
Lift and turn the lev-
ers on the two hing-
es.
4
Put the door on a
soft cloth on a sta-
ble surface.
6
Turn the two fasten-
ers by 90° and re-
move them from
their seats.
7
2
1
Carefully lift (step 1)
and remove (step 2)
the glass panel.
Clean the glass panel with water and soap.
Dry the glass panel carefully.
Installing the door and the glass panel
When the cleaning is completed, install the
glass panel and the oven door. Do the
above steps in the opposite sequence.
The screen-printing zone must face the in-
ner side of the door. Make sure that after
the installation the surface of the glass pan-
el frame on the screen-printing zones is not
rough when you touch it.
Make sure that you install the internal glass
panel in the seats correctly. Refer to the il-
lustration.
12