What To Do If - IKEA KURVOR Anleitung

ENGLISH
Installing the door and the glass panels
When the cleaning is completed, install the
glass panels and the oven door. Do the
above steps in the opposite sequence.
Make sure that you put the glass panels (1,
2 and 3) back in the correct sequence. The
middle panel (2) has a decorative frame.
The screen-printing zone must face the in-
ner side of the door. Make sure that after
the installation the surface of the glass pan-
el frame (2) on the screen-printing zones is
not rough when you touch it.
2 3
1

What to do if...

Warning! Refer to the Safety chapters.
Problem
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
Make sure that you install the top panel in
the seats correctly.
Possible cause
The appliance is deactiva-
ted.
The clock is not set.
The necessary settings are
not set.
The automatic switch-off is
on.
The Child Lock is on.
The fuse in the fuse box is
released.
Remedy
Activate the appliance.
Set the clock. Refer to "Set-
ting the time of day".
Make sure that the settings
are correct.
Refer to "Automatic switch-
off".
Refer to "Deactivating the
Child Lock".
Do a check of the fuse. If the
fuse is released more than
one time, contact a qualified
electrician.
19