Herunterladen Inhalt Inhalt Diese Seite drucken

2.2.2 Flow Temperature Control; Supplied Parts; Specification - Buderus EM100 Installationsanleitung

Vorschau ausblenden Andere Handbücher für EM100:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
2
Product Information

2.2.2 Flow temperature control

Linear relationship between the 0–10 V signal (U in volts) and
the required flow temperature  in °C with reference to the
minimum flow temperature range to the maximum flow
temperature range [default setting 20 to 90 °C]):
/ °C
90
20
0,5
1
Fig. 2
Linear relationship between the 0–10 V signal (U in
volts) and the required flow temperature  in °C)
The connected heat sources are enabled and disabled
according to the required flow temperature.
2.3

Supplied parts

Fig. 6 at end of document:
[1] Module
[2] Bag with strain relief
[3] Installation Manual
2.4

Specification

This product conforms to European directives and
supplementary national requirements in design and
operation. Compliance is demonstrated by the CE
marking.
You can request the conformity declaration of the product. If
you require this, contact the address on the back cover of these
instructions.
Specification
Dimensions (W × H × D)
Maximum conductor cross-
section
230 V terminal
Extra-low voltage terminal •
14
U / V
10
0010024409-001
151 × 184 × 61 mm (for more
dimensions  Fig. 7 at end of
document)
2
2.5 mm
2
1.5 mm
Specification
Rated voltages
BUS
Module mains voltage
User interface
Pump, solenoid valve,
interference output
Fuse
BUS interface
Power consumption –
Standby
Max. power output
per connection(PC0)
per connection(OE1)
Permitted ambient
temperature
IP rating
Protection class
ID no.
Table 3

°C
°C
20
12486
50
25
10000
55
30
8060
60
35
6536
65
40
5331
70
45
4372
75
Table 4
Measurements of low loss header temperature
sensor (T0)
EM100 – 6720891034 (2019/04)
15 V DC
(reverse polarity
protected)
230 V AC, 50 Hz
15 V DC
(reverse polarity
protected)
230 V AC, 50 Hz
230 V, 5 AT
EMSand EMS plus
< 3 W
400 W (high-efficiency
pumps permissible:
<30 A for 10 ms)
120 W (high-efficiency
pumps permissible:
< 30 A for 10 ms)
0 ... 60 °C
IP 44
I
Data plate ( Fig. 21 at the
end of document)


°C
3605
80
1256
2989
85
1070
2490
90
915
2084
100
677
1753
1480

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis