Trouble Shooting - SPORTSTECH ES400 Benutzerhandbuch

Power off
• Without any signal been transmitted into the monitor for 4 minutes, and the moni-
tor enter to SLEEP.
Operation
• When monitor power on (or press MODE, RESET key and hold for 3 seconds), LCD
will display all segments with Bi sound for one second and enter to SCAN mode as
Drawing B.
• With any signal been transmitted into the monitor, the value of TMR, DST, and CAL
will start to count up as Drawing C.
• Without any signal been transmitted into the monitor for 4 minutes, the monitor will
enter to SLEEP mode.
• When the display show Drawing D, it means the batteries need to be changed.
• If there is no signal when you pedal, please check if the cable is well connec-
ted.
• Battery low display:

6.2 TROUBLE SHOOTING

41
Drawing B
Drawing C
Drawing D