Display Functions - SPORTSTECH ES400 Benutzerhandbuch

SCAN
• The sequence of display: TMR > SPD > DST > CAL > ODO > PULSE.
• In SCAN mode, press MODE key to choose other functions.
• Automatically scan through each mode in sequence every 6 seconds.
SPEED (SPD)
• W/O any signal been transmitted into the monitor for 4 seconds, SPEED will
display "0.0"
• Display current training speed.
TIME (TMR)
• W/O setting the target value, time will count up.
• With setting the target value, time will count down from your target time to 0, and
as 0 is achieved time alarm.
• W/O any signal been transmitted into the monitor for 4 seconds, time will STOP.
• Range 0:00~99:59
DISTANCE (DST)
• W/O setting the target value, distance will count up.
• With setting the target value, distance will count down from your target distance to
0, and as 0 is achieved distance alarm.
• Range 0,0~999,9 KM
5. DISPLAY FUNCTION
38