SPORTSTECH ES400 Benutzerhandbuch Seite 33

Step 2 ATTACH THE SEAT AND SEAT POST
• Remove the pre-assembled nylon nuts (22) and flat washer (33)
from back of the seat (36). Fix the seat (36) with the top seat sli-
ding bracket (35) and fasten with nylon nut (22) and flat washer (33).
• Remove the pre-assembled M10 knob (32) and flat washer (33) from back of
the seat sliding bracket (35). Fix the seat sliding bracket (35) with the top bra-
cket of seat tube (31) and fasten with M10 knob (32) and flat washer (33).
• Attach seat tube (31) into the main frame (26) and secure in right position with the seat
post quick release knob (29). Adjust the height of seat by choosing the hole of seat tube.
NOTE: When you adjust the height of seat DO NOT pull out the seat tube over the
warning line "MAX" which showing on the tube.
33