Using Your Appliance; Setting And Adjusting The Time; Adjusting The Contrast; Timer Function - Fagor 6HV-585 TCX Betriebsanleitung

EN

4 / USING YOUR APPLIANCE

SETTING AND ADJUSTING THE TIME

• •
After connecting your appliance or after a long period without it being connected to the mains,
the "12:00" button will flash on the display.
To set the time on the clock
Set the time using the + and - buttons then validate by pressing the
button.
When the time has to be changed
Press the button then press
the new time (e.g. 7:30) using the + and - buttons.
Validate by pressing
A beep will be emitted to confirm that the new time has been set.

•ADJUSTING THE CONTRAST

Programming
Press the button then a few seconds later press
indication -CO- appears on the display.
Adjust the contrast using the + or – buttons and validate with the
button.

•TIMER FUNCTION

Programming
You can program the "Timer" function of your oven. Press the
button then .
Adjust the programming time using the - / + buttons, for example 1
minute. Validate by pressing
but the countdown starts.
Once the time has ended, the timer emits a series of beeps to warn
you. These beeps can be stopped by pressing any button.
twice. The time will flash. Program
.
. The display shows the time again
, until the
12
Display
1 2 : 0 0
0 6 : 3 0
Display
0 6 : 3 0
0 7 : 3 0
Display
Display