Measuring Surface Areas - Parkside HG04966 Bedienungs- Und Sicherheitshinweise

measurements and results will be
cleared from the display
Measuring surface
areas
1. Slide the function switch
position "DISTANCE". The display
will be turned on.
2. Press the MODE button
measuring mode indication symbol
for area will appear on the display
and the letter "L" (length) will flash
on the display
3. Press the READ button
measure the length. The measured
length will appear in the upper row
of the display
20
"W" (width) will start to blink on the
display
4. Press the READ button
measure the width. The measured
width will appear in the upper row
of the display
20
the surface area calculation will ap-
pear in the lower row
play
162 GB/MT
2
.
2
.
2
.
2
to the
9
once. The
4
.
twice to
6
and the letter
2
twice to
6
. The results of
2
of the dis-
21
2
27
2