Parkside HG04966 Bedienungs- Und Sicherheitshinweise Seite 169

- This means that iron is detected at a
significantly greater distance than
copper for example.
- Please note that power lines can only
be detected as such, if they are carrying
voltage.
- Light switches must always therefore be
switched on, so that the conductor is
carrying voltage. All the fuses must
similarly be inserted or switched on.
- Please note that only voltages of
230 V∼ 50 Hz are detected.
The locating of concealed objects is the
same in all three modes (STUD = wood,
AC WIRE = live electric power cables,
METAL = metal).
1. Slide the function switch
"DETECTOR".
2. Slide the material switch
AC WIRE or METAL. Respective mode
arrow
correctly indicating the right material.
3. First of all, the appliance must be
calibrated. Place it flat against the
on the display
17
to
9
to STUD,
3
will be
2
GB/MT 169