Shelf Plate Attachment Screw (M4 × 12) - Panasonic TY-ST65PB2 Bedienungsanweisung Und Montageanweisungen

6. Fix the shelf plate ⑤ (1) to the back of
the bottom fitting with the shelf plate
attachment screws Ⓔ (4). (It can be
attached to either the right or left side.)
(Tightening torque: 1.2 to 1.5 N·m)
2. Preparing the display
Attaching the insulation spacers
① Place the front surface of the display on a clean
cloth that has no dirt or foreign objects on it, and
follow the procedure below.
If the display has any protruding parts, take care
not to scratch or damage them.
② Remove the caps (4) from the display using a
Phillips head screwdriver.
Note
Keep the caps that were removed in a safe place.
(They will be required if you use the pedestal.)
③ Using the supplied Allen wrench Ⓖ, attach
accessory parts Ⓕ (four Allen head countersunk
screws, dished toothed washers, and insulation
spacers) at the locations where the caps were
removed as shown in the figure on the right.
(Tightening torque: 3 to 4 N·m)
Cutout
Tab
Cap
Blanket
Blanket
TY-ST65PB2 TY-ST50PB2
Shelf plate ⑤
Shelf plate
attachment
screw Ⓔ
Phillips head
screwdriver
Allen wrench Ⓖ
Accessory parts Ⓕ
19