Panasonic TY-ST65PB2 Bedienungsanweisung Und Montageanweisungen Seite 11

Removing the display
① Remove the screws (2) for securing unit Ⓗ
(1 each on the right and left) from the mobile
stand.
② Remove the cord or wire for preventing the unit
from falling over.
③ Disconnect the power cord and the wires
connecting the display to the other units.
④ While lifting the bottom part of the display, pull
the display toward you.
⑤ After the bottom insulation spacers have been
removed, continue lifting up the display and
remove it.
22
Screw for
securing unit Ⓗ
⑤
Insulation spacer
④