Fitting The Parking Aid; Connecting The Parking Aid - Dometic MWE7006 Bedienungsanleitung

Fitting the parking aid

6 Fitting the parking aid
See fig. 7 to fig. 0
Supplement to fig. 8
A
NOTICE! Risk of malfunction!
Align the sensor holders so that the fastening lugs are horizontal.
Otherwise, there is no guarantee the parking aid will function cor-
rectly.
➤ Push the sensor holders into the holes until they lock into place.
Supplementary to fig. 0
➤ Ensure that the loudspeaker is switched on (ON position).
7

Connecting the parking aid

See fig. a
I
NOTE
On some vehicles, the reversing light only works when the ignition
is switched on. In this case, you must switch on the ignition to
identify the positive and earth cables.
No. Designation
1 Control electronics
2 Reversing light
3 Blue/black cable: connection to the reversing light
4 Brown cable: connection to earth
5 Yellow wire from the loudspeaker
6 Blue wire from the loudspeaker
7 Red/grey cable: connection to the radio's mute connection
(optional)
8 Sensors connection cable
9 Sensors
8
MWE7006
Plug socket
for plug
–
–
14
2
15
3
6
9/21
–
EN