Fitting The Parking Aid - Dometic MWE9004 Montageanleitung

MagicWatch MWE9004, 9008
5.2 Painting the sensors
See fig. 2
I
NOTE
The sensors may be painted. The manufacturer recommends having the
sensors painted by a specialist workshop.
6

Fitting the parking aid

See fig. 7 to fig. 0
A
NOTICE! Risk of malfunction
Align and attach the sensor holders correctly. Otherwise the correct
function of the parking aid cannot be ensured.
The sensor holders must be attached with the retaining tabs pointing up
and down.
A
NOTICE! Risk of paint damage!
• The ambient temperature may not fall below 18 °C when punching
or drilling.
• We recommend using a punching tool.
Supplementary to fig. 7 A
➤ Drill the holes according to the selected sensor holder.
Supplementary to fig. 7 B
➤ Make sure that you do not tilt the punching tool when operating.
Supplementary to fig. 8
➤ Clean the adhesive surface on the inner side of the bumper with a primer.
EN
Fitting the parking aid
9