Cleaning/Maintenance; Cleaning - Silvercrest SBTV 3.2 A1 Bedienungsanleitung Und Sicherheitshinweise

8. Cleaning/maintenance

8.1. Cleaning

DANGER! Always remove the mains adapter (2) from the socket and the small
plug of the mains adapter from the body trimmer or charger before cleaning
commences.
DANGER! Never immerse the body trimmer in water or any other liquid.
After cleaning, add a few drops of acid-free oil (for example, sewing machine oil) to
the cutters (6) and the shaving film (7) every so often. Leave the body trimmer
running for a few seconds without using it to allow the oil to spread out evenly. Then
wipe off any excess oil with a soft cloth.

Remove the comb attachment (8, 9, 10) if fitted. The comb attachments (8, 9, 10) can be
cleaned using soapy water. Then dry them well.

The housing of the body trimmer can be wiped using a slightly damp cloth; never use any
aggressive cleaning agents.

Remove any remaining hair from the shaver head using the cleaning brush.

For a more intensive clean, you can remove the shaver head from the body trimmer.
Using your thumb and forefinger, grip the shaver head in the middle of the cutters (6)
and remove it from the head part of the body trimmer.

The head part of the body trimmer and the removed shaver head can be rinsed off under
running water. Then dry the parts thoroughly. Do so carefully to prevent damaging the
shaving foil (7).

Using your thumb and forefinger, grip the shaver head in the middle of the two cutters
(6) and push it back into the head part of the body trimmer.
SilverCrest SBTV 3.2 A1
English - 61