Preparing Espresso; Preparing Cappuccino - Klarstein 10033209 Bedienungsanleitung

Preparing Espresso

ATTENTION: Do not leave the appliance unattended during use, as it
requires manual operation.
1 Make sure that there is enough water in the water tank and refill it if necessary.
2 Make sure that the steam knob is at position 0 and the button
accidental scalding.
3 Press the button and wait a moment until liquid runs out of the outlet.
4 Re-press the button
5 Place a cup on the drip grid under the outlet.
6 Wait until the indicator WATER lights to show that the water has reached the
appropriate temperature for making Espresso.
7 Press the button and wait a moment until liquid runs out of the outlet.
8 When the desired amount of espresso has been dispensed, re-press the button
NOTE: When the colour of the coffee changes to a weaker shade, refill with fresh coffee
powder as described.
9 Press the button to turn off the appliance. The indicators POWER and WATER
turn off.

Preparing Cappuccino

You get a cup of Cappuccino by topping a cup of Espresso with a froth of milk.
CAUTION: When preparing steam, place the metal funnel in the funnel
holder to prevent burns from pouring hot liquid.
1 Make sure that there is enough water in the water tank and refill it if necessary.
2 Make sure that the steam knob is at position 0 and the button
accidental scalding.
3 Prepare an Espresso.
4 Fill a jug with about 100ml of milk for each Cappuccino to be prepared.
HINT: We recommend using whole milk at refrigerator temperature and not
hot milk.
5 Press the button .
6 Wait until the indicator STEAM lights.
. The appliance begins to heat the water.
is off to prevent
.
is off to prevent
EN
39