Turning The Appliance Off - BERTO’S G6F2B Bedienungshandbuch

108 |
operation for cooling – defrosting.

TURNING THE APPLIANCE OFF

Turning the appliance off in the case of failure or
malfunctioning.
In case of malfunctioning, disconnect the gas and electric
power supplies from the appliance. Please call the
Technical Support.
What to do if the appliance is not used for a long period.
When the appliance is not to be used for a long time, clean
thoroughly and turn off both the gas and electric supply.
CARE OF THE MACHINE
ATTENTION!
- Before cleaning, turn the machine off and let it cool.
- For electrically powered machines, turn off the
disconnecting switch to cut off the supply of
electricity.
EN
Careful daily cleaning of the machine ensures perfect
operation and long life. The steel surfaces are to be
cleaned with liquid dishwashing detergent diluted in
very hot water, using a soft cloth. For tougher dirt, use
ethyl alcohol, acetone or another non-halogen solvent.
Do not use abrasive powder detergents or corrosive
substances such as hydrochloric, muriatic, or sulphuric
acid. The use of acid may compromise operation and
safety of the machine.
Do not use brushes or pads made of metal or alloys which
may cause rust stains.
For the same reason, avoid contact with iron objects.
Use caution with stainless steel pads and brushes which,
although they do not contaminate the surfaces, may
cause harmful scratches. If the dirt is stubborn, absolutely
do not use sandpaper or grinding paper. We suggest using
synthetic sponges instead, such as Scotch-Brite. Also, do
WARRANTY CERTIFICATE
COMPANY NAME:
ADDRESS:
____________________________________________________________________________________________________
POSTAL CODE :
PROVINCE:
_______________
ATTENTION!
The manufacturer declines all responsibility for any inaccuracies in this handbook due to typing or printing errors.
The manufacturer reserves the right to make any changes that may be required without altering the basic features of the
product. The manufacturer declines all responsibility in the event that the instructions given in this handbook are not fully
observed. The manufacturer declines all responsibility for any direct or indirect damage caused by incorrect installation,
tampering, poor maintenance and negligent use.
____________________________________________________________________________________________
TOWN:
__________ ___________________________________________________________________________
INSTALLATION DATE:
MODEL.
_________________________________________
PART NUMBER:
not use products for cleaning silver. Beware of the fumes
of hydrochloric sulphuric acid used, for example, to clean
floors.
Do not aim jets of water at the machine, to avoid
damaging it.
After cleaning, rinse thoroughly with clean water and dry
carefully with a cloth.
____________________________________________________________
________________________________