Submenu "System; A) Function "Date/Time; A) Function "Record Mode - Renkforce 1243795 Bedienungsanleitung

11. Submenu "System"

• As described in chapter 10, briefly push the button "MENU" (5) to call the OSD menu. Then use the con-
trol buttons "G" or "►" (9) to select the submenu "System" and push the button "OK" (8) to confirm.
• Use the control buttons "S" or "F" (9) to select the desired function now. Confirm the selection with
"OK" (8).

a) Function "Date/Time"

• Use the control buttons "G" or "►" (9) to switch between the settings for year, month, date, hour and
minute.
• Change the displayed value with the control buttons "S" or "F" (9).
• Save the settings with the button "OK" (8); then you will leave setting mode again.
To leave setting mode without saving the settings (cancel), push the button "MENU" (5).
b) Function "Record Mode"
Here, you can set what happens when the memory card used or the USB data carrier is full.
• Use the control buttons "S" or "F" (9) to choose between the following operating modes:
"Normal": If the memory card or the USB data carrier is full, the recording is terminated.
"Overwrite": If the memory card or the USB data carrier is full, the respective oldest recordings are
automatically overwritten.
• Save the selection with the button "OK" (8); then you will leave setting mode again.
To leave setting mode without saving the settings (cancel), push the button "MENU" (5).
55