Cutting Hair; Hair Trimmer Attachment - Silvercrest SHBS 3.7 A1 Bedienungsanleitung

BB.5$ B%ERRN 6HLWH  'LHQVWDJ  'H]HPEHU    

6.3 Cutting hair

Hair trimmer attachment|12

NOTES:
• The hair to be dressed must be dry.
• The cutting length may deviate depending on the cutting
angle.
• Place a sheet or cape around throat and neck to prevent
cut-off hair from dropping into the collar.
• Comb the hair well.
• First, start with a comb attachment|2 with a longer cutting
length and then, in the course of the cutting process, use
shorter cutting lengths step by step.
• Start by cutting the hair in the neck or on the sides and cut
towards the centre of the head. Then, cut the front section
of the hair towards the centre of the head.
• Hold the hair and beard trimmer|5 in such a way that the
comb attachment|2 lies as flat as possible on the head.
Move the device evenly through the hair.
• If possible, cut against direction of hair growth.
• In order to catch all the hair, move the hair and beard trim-
mer|5 several times through each section of the hair.
• Comb the hair repeatedly and well.
• In order to achieve a straight cutting line for cutting lengths
over 12 mm, the hair and beard trimmer|5 should be
passed through the hair several times from different direc-
tions.
12 GB