Device Specifications; Safety Instructions - Parkside PGG-30 Bedienungs- Und Sicherheitshinweise

Device specifications / Safety instructions
HOT-MELT GLUE GUN
The numbers in the following text
correspond to the numbers in the
illustrations.
Warning! Always read the
instructions for electrical products
carefully before use. This enables
you to become more familiar with
the product and avoid
unnecessary risks. Keep these
instructions in a safe place, where
they are always available.

1. DEVICE SPECIFICATIONS

Technical specifications
Supply voltage:
Nominal consumption
(when warming up):
Nominal consumption
(when hot):
Warm-up time:
Protection class:
Items included
1 Hot-melt glue gun PGG-30
1 Charging station with device holder
1 Electrical cord
1 Support
1 Glue nozzle, long model
2 Glue nozzles, short model
(one premounted on the device)
6 Glue sticks
1 User manual
1 Warranty certificate
1 Carrying case
Product overview
(See illustration on page 4)
1. Feed canal
2. Control display
3. Electrical connection for charging
station
26 GB/MT
4.
5.
6.
7.
8.
9.
10.
11.
Your hot-melt glue gun is intended for
gluing various materials and for making
small repairs. This device is intended
exclusively for use in private households.
Commercial or similar use is a regulatory
violation and will void the entire warranty.

2. SAFETy INSTRUCTIONS

Key to symbols
230 V, 50 Hz
500 W
30 W
approx. 4 min.
II
General safety instructions
Warning! All instructions must be read.
Failure to comply with the following
instructions can cause electric shock,
burn and/or other serious injury. Adhere
faithfully to these instructions!
Burn hazard! The glue and nozzle reach
a temperature of 200°C. Do not touch the
nozzle or glue. Do not allow the hot glue to
touch people or animals.
In the event of contact with skin,
immediately hold the area under cold
running water for several minutes. Do not
try to remove glue from the skin.
Charging station with device holder
Feed switch
Support
Drip pan
Glue nozzle
Heat protection sheath for glue nozzle
Electrical connection on glue gun
Electrical cord
Violation of the safety instructions
in this manual poses a risk of
death or injury and a risk of
damage to the device.
Risk of electric shock.