Sound Playback Only In One Headset Earpiece; No Sound Playback When Connecting A Second Headset; Cleaning / Maintenance; Environmental And Disposal Information - Silvercrest SKL 36 B1 Bedienungsanleitung Und Serviceinformationen

SilverCrest SKL 36 B1

Check the settings on your audio source, for example:

Is the volume set correctly?

Has playback started?

Press the button that is built into the microphone (5) to stop the playback
pause.

Sound playback only in one headset earpiece


Check whether the jack plugs (4) of the audio jack cable (B) are inserted
fully into the jack sockets (6) of the headset (A) and audio source.

Check the balance setting of the audio source.

No sound playback when connecting a second headset

Check whether the first and second headsets are connected correctly via a
suitable audio cable.

Cleaning / maintenance

Only use a clean, dry cloth for cleaning the headset (A) and never use any
corrosive liquids. Never try to open the housing of the headset (A) as this
would void your warranty.

Environmental and disposal information

When this symbol appears on a product, this indicates that the
product is subject to the European Directive 2012/19/EU. All
electrical and electronic devices must be disposed of separately
from household waste at designated disposal points.
The correct disposal of old devices in this manner will prevent environmental
pollution and human health hazards. For further information about proper
14 - English