Putting On The Headphones; Headphones Button Functions For Music Playback; Headphones Button Functions As A Hands-Free Device - Silvercrest SBKL 40 A1 Bedienungs- Und Sicherheitshinweise

For IOS device, please complete the Siri setup
before activate with this voice control function
on headphone. For Android device, please open
the Google assistant function and then follow its
instructions to complete setting before using voice
control function on headphone.
NOTE: Google Assistant is available on
Android 5.0 or above devices.
2. Activate the Bluetooth function and connect
this headphones with your mobile device.
3. After connecting the headphones with your
mobile device, press the Play / Pause button
for about 4 seconds to activate the voice
4
control function.
4. Now you can use the voice control function.

Putting on the headphones

The headphones can be adjusted to your head
size, if necessary: The speakers
to the band with a metal rail for this purpose.
1
Adjust these to ensure optimal comfort. Please
follow the marking "L" (= left) and "R" (= right).
Headphones button
functions for music playback
Start a playlist on your playback device and
set the volume to minimum first. After putting
the headphones on select a pleasant volume.
You can adjust the headphones volume
with volume control button
is played back through the speakers
This headphone contains total 5 buttons.
These control the following functions:
Button Function
– Press and hold approx.
4 seconds to enable voice con-
trol function.
– Press once to play / stop music
playback.
12 GB
Button
are secured
2
You may also use the headphones for telephone
calls when used with a communication device
which supports this function. If your communi-
cation device supports the Bluetooth
or . Music 4.1, you will be able to use the following func-
3 5
. tions:
2
Function
Answer / end call Briefly press Play / Pause
Ignore call
Function
– Press once to increase the
volume by one level. One
signal tones will sound when
the maximum volume has been
reached.
– Press and hold approx. 2 sec-
onds to skip to the next track.
– Press once to reduce the
volume by one level.
– One signal tone will sound
when the minimum volume has
been reached.
– During playback, press and
hold approx. 2 seconds to
jump to the previous track.
– In paired mode, press and hold
for approx. 2 seconds to change
to pairing mode to allow another
communication device for con-
nection.
– Press for approx. 3 seconds to
switch ANC ON / OFF
– Press and hold approx.
4 seconds to turn the product
ON / OFF
Headphones button functions
as a hands-free device
Action
button
Hold the Play / Pause but-
ton
4
standard
®
4
approx. 2 seconds